Lime rotary kiln roasting system

For the lime kiln firing kiln roasting system, the ignition kiln system is about a key link to put into production, it should be fully prepared. All equipment for the roasting and feeding system includes the preheater, the rotary kiln, the unloaded stand-alone and other normal operation and the adjustment to the start-up operation, the fuel supply equipment is operating normally and the fuel can be sent to the front of the rotary kiln to ensure preheating equipment, coolers and other equipment safe operation of auxiliary systems such as compressed air, lubrication systems should be put into normal operation ahead of time.
In the process of stand-alone test, we should pay attention to the lime rotary kiln operation in the tug axis temperature and wear changes, the bearing temperature cannot be greater than sixty degrees. After the safety monitoring, the various equipment can be safely put into industrial production, but also for the safety of the operator to provide a guarantee.
As a large professional lime rotary kiln manufacturer, can now produce Nissan 800T below the active lime rotary kiln complete sets of equipment, and to ensure the realization of turnkey projects, including equipment installation, personnel training, such as a set of follow-up services to ensure that users can short time to achieve production. According to the customer's production needs to design and production of major equipment such as lime rotary kiln, vertical preheater and other equipment, and guide the usage of refractory insulation materials. The active lime rotary kiln is a new type of lime rotary kiln with vertical preheater and cooler.