Maintenance Skills of Fly Ash Dryer

Wet fly ash from the feeding device into the inner layer of the three-tier drum to achieve downstream drying, fly ash in the inner copy of the board constantly under the scatter is spiral to achieve heat exchange, the material moved to the inner the other end into the middle, the countercurrent drying, the material in the middle continue to be repeatedly into the progress, was presented in two steps back step by step, the material in the middle of both the absorption of the inner layer of the heat, but also absorb the heat , while extending the drying time, the material in this to achieve the best dry state.
The material line to the other end of the middle and fall into the outer layer, the material in the outer roller was rectangular multi-loop way to achieve the effect of drying materials in the hot air under the action of the rapid discharge of the drum, did not reach the dry effect of wet material due to their own weight cannot be fast travel, material in this rectangular copy board to fully dry, thus achieving the drying effect, complete the drying process. Exhaust dust and dust through the dust collection equipment unified dust collection.
Fly ash dryer maintenance should pay attention to cleaning, fastening, lubrication and adjustment, fly ash dryer different parts of the maintenance there are differences. In fact, the maintenance of the equipment is to reduce the long-term wear and tear parts, reduce or eliminate the probability of occurrence of failure, improve the efficiency of fly ash dryer equipment, thereby extending the service life of the equipment.
Before the start of the fly ash, be sure to carefully check, around the cleaning, fastening, lubrication and other operations as the center, the operator must have the ability to complete the inspection and analysis, the daily boot must be a perfect check.
According to the situation of fly ash itself to develop a maintenance plan, that is, according to the dryer equipment parts of the situation, set the classification of maintenance, each stage need to be checked once, including the dryer equipment maintenance to lubrication, adjust for assistance.
As many of the mining equipment are open-air operations, maintenance is particularly important. ZK CORP recommends the user according to the status of fly ash dryer for regular maintenance, whether it is hot summer or cold winter, should pay attention to maintenance, only good maintenance to ensure the life of the dryer equipment.