Introduction of shaftless screw conveyors

No shaft screw conveyor uses: WLS series of shaftless screw conveyor for the sewage treatment plant in the delivery of fine grille its grid spacing 50mm of the decontamination machine slag and filter cake and other materials. Good environmental performance. The usage of fully enclosed and easy to clean the spiral surface, to ensure that environmental sanitation and delivery of materials from pollution, do not leak. Torque, low energy consumption. As the spiral without shaft, the material is not easy to plug, the discharge port is not blocked, which can run at lower speed, smooth transmission, reduce energy consumption. Torque up to 4000N / m. Large amount of delivery. The amount of delivery is the same diameter as the traditional shaft screw conveyor 1.5 times. Long distance transport. Stand-alone transport length of up to 30 meters. And according to user needs, the usage of multi-level series installation, ultra-long distance transport materials. I developed the production of mobile-type shaftless screw conveyor, can work and more usage. Can be the bottom of the material, but also the end of the material. The usage of special liner, it can work at high temperatures. Compact, space-saving, beautiful appearance, easy to operate, economical and durable.
Non-shaft screw conveyor applications: used in drilling mud does not fall to the disposal of waste slurry treatment system, food waste / garbage transport, mud cake transport and other aspects of your application tailored.
Non-shaft screw conveyor
The shaftless screw conveyor is mainly composed of the drive device, the head assembly, the casing, the non-axis spirals, the trough lining, the inlet, the outlet, the cover (if necessary), and the base ect..
Driving device: the usage of cycloid wheel reducer or shaft mounted hard tooth gear reducer, the design should be the drive device as far as possible in the outlet side, so that the spiral body in the running state of tension.
Head assembly: a thrust bearing, can withstand the transmission of material produced when the axial force.
Case: U-shaped or U-shaped chassis, the upper plus rain-proof cover, the material is stainless steel or carbon steel or glass steel.
Cordless body: made of stainless steel or carbon steel.
Tank lining: the material for the wear-resistant plastic sheet or rubber plate or cast stone and so on.
Input and output of the mouth: a square and round two, the general into the outlet form by the user.