20 TPH magnesium rotary kiln manufacturer

Q: What is the magnesium rotary kiln?
A: Magnesium rotary kiln process raw materials (dolomite) broken by the crusher qualified material 40mm or so, with magnesium rotary kiln sintering, calcined into calcination white, cooled by the cooling machine, and then through the ball mill ground into powder, the machine is pressed into the ball, after crushing and ferrosilicon powder and fluorite powder mixed homogeneous group, into the heat-resistant stainless steel reduction tank, placed in the reduction furnace, in 1200 degrees and 1.32 Pa vacuum reduction of coarse magnesium, flux refining, ingot, surface finished get finished magnesium ingredients.
Q: What are the characteristics of magnesium rotary kiln?
A: Magnesium rotary kiln with advanced structure, low pressure loss of the vertical preheater can effectively improve the preheating effect, the preheated metal magnesium into the rotary kiln decomposition rate of up to 25%, and can directly use 15mm fine-grained limestone reliable rotary kiln at both ends of the combination of scales sealed. Magnesium rotary kiln-filled, partitionable or ventilated circular or square vertical cooler to give the cooler a lime temperature of 800 ° C ambient temperature for easy transport.
Q: How to buy high-quality magnesium rotary kiln?
A: Do not just determine one magnesium rotary kiln manufacturer, but to determine more than three you think the more powerful manufacturers to carry out all aspects of selection, and ultimately determine the magnesium rotary kiln manufacturers require a relatively close to their location Of the customer site; to the magnesium rotary kiln manufacturers to conduct field trips to determine the purchase of high quality magnesium rotary kiln can be purchased.