TH series bucket elevators supplier

1. Product introduction
TH series of bucket elevator is widely used vertical transmission equipment for conveying all kinds of polished bulk materials and pieces of material, the material temperature below 250 ℃, such as cement, sand, soil coal, grain, etc.. And it widely used in building materials, electricity, metallurgy, machinery, chemical and other industries.
2. Application scope
For metallurgy, building materials, coal, electricity, light industry, food, ports, chemicals, ships and other industries.
3. Applicable materials
A variety of polished bulk materials and pieces of material, grinding material temperature below 250 ℃, such as stone, cement, sand, soil, coal, food and so on.
4. Product advantages
TH series bucket elevator has the advantages of simple structure, convenient maintenance, smooth operation, small footprint, large conveying capacity, high lifting height and good sealing performance.
5. Features:
1) Simple structure, good sealing;
2) High capacity, high lifting height;
3) Small footprint, compact layout, light weight equipment, civil construction investment is low.
6. Structure:
1) Hoist chain with low alloy steel forging, and carburizing quenching treatment, with a strong tensile strength and wear resistance, reliable connection with the hopper.
2) The middle shell of the hoisting machine adopts 3mm steel plate bending structure, good rigidity, small welding deformation, improve the overall performance of the bucket elevator, connecting flange with 63 × 63 × 6 equilateral angle, and in the chassis set the maintenance door, in order to observe, check the internal work of the hoist, the failure to facilitate maintenance.
3) In the chassis connection parts using gasket seal, so that the chassis shape beautiful, tight seal.
4) The tensioner of the hoist is screwed to adjust the degree of tightening of the drive chain and to prevent deviation. In order to make the tension sprocket in the uneven tension will not occur after the tilt, the lower bearing and bearing between the spherical combination of the usage of self-aligning bearings, play a role in self-aligning.
5) The feed inlet is divided into high and low positions: the height is at an angle of 60 ° to the horizontal plane and is used to transport less dispersed materials such as moisture and powder. The low level is at an angle of 45 ° to the horizontal and used to transport dry and scattered good material, and the location of the feed port is higher than the center of the bottom axis 100 ~ 150mm, so that the formation of loading and digging combined to avoid the feed port aggregate blockage. And reduce the number of elevator running resistance, and increase the bucket fill factor.
TH series bucket elevators has the features of high capacity, reliable working, small area needed, high lifting height and easy maintenance.