Cyclone dust collector used for PVC Pipe factory

There are a variety of dust collector equipment, usually with the following five methods: sedimentation method, centrifugal method, filtration method, washing method and electro-deposition method.

Cyclone dust collector is a kind of centrifugal method that has been used for many years. Its work principle is the usage of centrifugal force to separate the dust in the air, dusty air along the tangential direction of the expansion of the internal rotation into the cyclone dust collector, dust particles to the separation force, due to centrifugal force to the dust particles driven to the cyclone on the inner wall, and the role of gravity and the accumulation of dust particles to the bottom of the cone to the bottom, the dust is usually collected in the lower part of the cyclone in the hopper. Remove the dust from the clean air up to the top of the inner wall of the cyclone, the exhaust pipe leads.

Cyclone dust collectors are typically used to remove coarse particles from dusty air and can also be used as pretreatment equipment in high efficiency dust collectors or as separators for pneumatic conveying systems.
The main advantages of cyclone dust collector is the low cost of equipment, low maintenance costs, low pressure drop, but cannot be used to collect fine dust particles. The size and dust removal efficiency of the cyclone dust collector mainly depends on the density of the solid particles and the conveying air, the solid phase concentration, the inlet gas velocity and the structural size of the cyclone itself. Increasing the inlet airflow speed or reducing the diameter of the cyclone can increase the dust removal efficiency of the fine particles and the particle size is generally not less than 10 μm. But reduce the diameter of the cyclone dust collector, it will reduce its capacity, and ultimately will inevitably lead to the usage of multiple combined cyclone dust collector, the cost of a corresponding increase.

When selecting cyclone dust collect, you need to be considered that dust collecting efficiency, the pressure drop of the cyclone dust collector, and the cost of repairing the equipment and replacing parts when handling abrasive resistant materials.