Discussion on Classification of Bucket Elevator

Bucket elevator as a common lifting equipment, has a very wide range of applications, according to different process requirements should use the appropriate type of equipment. Zk corp based on years of experience on the classification of bucket elevator to make the following analysis:

(1) TD series bucket elevator
Its specification contains TD1000(Not commonly used)TD160, TD250, TD315, TD400, TD500, TD630, TD800 and other models, including TD160, TD250, TD315 and other models for the general usage of models.
(2) TH series bucket elevator
TH series bucket elevator is a commonly used lifting equipment, this series bucket elevator with forging chain as a transmission part, with a strong mechanical strength, mainly used for lifting powder and small particles and small pieces of material. Different from the TD series bucket elevator, the lifting capacity is greater, more efficient operation. It is often used for a larger proportion of the material to enhance.
(3) NE series plate chain bucket elevator
NE series of chain hopper hoist is a new type of bucket elevator, and uses chain drive, different from the old model TB series of chain bucket elevator, the naming method used to lifting capacity rather than the bucket width. For example, NE150 refers to the lifting capacity of 150 tons for one hour instead of fighting width 150. NE series bucket elevator has a very high efficiency of the hopper, according to the different speed is also divided into NSE models and high-speed plate chain bucket elevator.
(4) Other models bucket elevator
Common bucket elevator models are HL series chain bucket elevator, GTD series bucket elevator, GTH series bucket elevator, etc., which are different models of the name and evolution of different forms.

Bucket elevator model selection:
As a commonly used lifting equipment, bucket elevator selection is restricted by many factors, the wrong model will give the user to bring endless trouble. General decision bucket elevator selection depends on the following elements:
1. The form of material: the material is powder or granular or small pieces.
2. The physical properties of material: the material has no adsorption or viscosity, whether contains the water or not.
3. Material proportion: the general bucket elevator parameters are for the bulk of the proportion of 1.6 in the following material design and calculation, too much material weight required traction and transmission part of the tensile strength of the calculation.
4. The amount of conveying capacity per unit of time.

Bucket elevator selection process is as follows: the proportion of material → transmission mode (Bucket elevator models) → material properties → discharge mode → hopper form → the amount of conveying capacity of this series bucket elevator → determine the model.