FU type chain conveyor with the usage of norms and maintenance
Date:2017-03-10 Source:zk corp Views:
1FU type chain conveyor operation steps
1.1 Training and obtains the operation certificate, the quasi-operation of the FU-type chain conveyor.
1.2 Before opening the FU chain conveyor, check the transmission parts, conveyor chain and safety protection device should be solid and reliable.
1.3 Check the lubrication of the various parts should meet the requirements, not to be based on equipment lubrication "five" for filling lubricating oil (fat).
1.4 Boot sequence
(1) The first to open materials or equipment;
(2) Start FU-type chain conveyor;
(3) Start the feeding device or equipment.
1.5 FU chain conveyor in the operation of traditional Chinese medicine supply evenly. Material too easy to plug, out of the machine, causing damage to the conveyor chain derailment.
1.6 Should always check the tightness of the conveyor chain, if necessary, can be adjusted at any time. There is no deviation from the uneven force.
1.7 FU chain conveyor in the course of any failure, should immediately stop inspection and repair.
1.8 Downtime should first stop feeding equipment or equipment, to be transported on the chain of materials go after the net, and then stop.
1.9 FU chain conveyor clean, sanitary.
1.10 Carefully fill in the relevant records.
2 Maintenance of FU Type Chain Conveyor
2.1 Sprock wear and maintenance
Sprockets in the long-term use of the process due to continuous loss, sprocket teeth prone is easy to wear, resulting in sprocket and chain lock instability, or even the phenomenon of falling chain. According to the use of the sprocket, then the technical improvements. Sprockets with wear-resistant combination of sprocket, wheel and wear-resistant combination from the combination, and wear-resistant pieces of special heat treatment, the hardness is moderate, high strength and good wear resistance.
2.2 Maintenance of the conveyor chain
FU conveyor chain is one of the most prone to wear parts, in order to reduce the maintenance of the chain, the use of chain plate high-strength wear chain, chain material selection of high quality alloy steel and special heat treatment machine polishing, Excellent performance, with high precision and finish, to ensure stability, wear and improve the service life of the conveyor chain. In order to extend the service life of the chain, the use of a sealed and lubricated device, the device energy saving 5 to 10%, while reducing the noise.
2.3 Maintenance of the transmission system
The usage of precision hardened surface reducer, heavy bending plate chain and hydraulic coupler, making the drive system is very compact, especially adapted to the transmission machinery drive system power transmission, running more stable, lower noise.
2.4 Chassis part of the improvement and maintenance
The bottom of the chassis is also prone to wear and tear of the place, in order to extend the service life of the conveyor equipment, cement machine at the bottom of four additional wear plate, the bottom more wear and tear, less resistance.