Precautions of Starting Air Sweep Coal Mill

Air swept coal mill is an ideal coal processing equipment that can both grind and dry, with characteristics of high efficiency, energy saving, environmental protection, 8% and above of its grinding coal can pass through the 200 mesh screen, and the water content can be under 2%, it is an ideal grinding equipment for coal powders that are used in industrial furnaces and rotary kilns and other equipment.

ZK Corp. after years of improvement, the air sweep coal mill manufacturing quite experienced today to give you a brief communication about some of the start Note:

Before the mill starts, remove all debris that is in trouble with the mill and check that the fixing bolts and feet are tightened. If there is loosening, the cooling pipes must be smooth. The lubrication points must be filled with the appropriate amount of lubricants (grease) and require to ensure that the oil flow. Check the sealing device is good, explosion-proof device is safe and reliable. Pipeline cannot have flammable materials exist, a variety of instruments and valves should be normal and easy to use. The direction of rotation of the mill must be the same as the design direction. In the above-mentioned inspection is completed that are normal, can be prepared to start.

Before starting the mill, contact the relevant staff (such as hot air stove, coal conveyor, etc.) and start the mill when the answering signal of the mill is allowed to be started.

We will feedback to the company about any of the details of the usage problem, and they will be improved to enhance the scientific and technological content of air sweep coal mill.