PL type vertical impact crusher application

PL series vertical impact crusher use mutual impact of self-crushing material or metal impact plate to strike crusher. This machine has two kinds cavity of "stone hit stone" and "stone blacksmithing ". The former "stone hit stone" is used in hard material crushing processing, the latter " stone blacksmith "is used in medium hard material crushing and processing, two cavity structure can achieve mutual conversion to meet the different materials broken processing.
PL series are widely used in crushing and rough grinding of metal and non-metallic ores, highway, water conservancy and hydropower, refractory materials, abrasives, broken glass, ceramic raw materials, aggregate for urban construction, artificial gravel and various metallurgical slag, special hard and abrasive materials such as silicon carbide, silicon carbide, sintered bauxite, magnesia, etc., than other types of crusher more advantages.

Working principle:
Stone hit stone: the material from the upper part of the equipment evenly vertically drop, part of the feeder and feed into the high-speed rotation of the impeller cavity, under the action of high-speed centrifugal force from the impeller launch out of the mouth, circle material around the high-speed impact crushing, the material in the mutual impact, will be in the impeller and whirlpool cavity formed vortex and multiple impact friction fracture.
Stone hit iron: the material from the upper part of the equipment evenly down, through the feed tube into the high-speed rotation of the impeller cavity, under the action of centrifugal force from the impeller launch out of the impeller around the circle with the adjustable metal counterattack plate or counter- Impact crushing.
Vertical impact crusher advantages:
1. The cavity volume increases, output increase
2. Higher manufacturing accuracy and stronger anti-imbalance
3. Lower operating resistance, reduce the consumption of motor power
4. A reasonable size and angle, wearing consumable consumption to a minimum
5. Wear parts on the finished product to minimize the pollution
6. Quick and easy replacement of wearing parts