GX and LS Type Screw Conveyor

Date:2016-11-18 Source:zk corp Views:

With the continuous progress of industrialization, the continuous development of the transport industry, and as a closed transmission equipment, screw conveyor came into being, and with its continuous technological upgrading, the type of screw conveyor and the usage of materials are diversified. The ways of its material transport also are improved, with the people required continuous improvement, such as horizontal transport, tilt transport, vertical transport.


GX and LS-type screw conveyor are two products of the screw conveyor, they have a lot of the same place, and there are some differences, for different types of customer requirements, you can make the appropriate design. Where are the similarities and differences between these two devices? The following is a description of the problem.

The similarities of the GX and LS type screw conveyors are as follows:
First, the working principle is the same. The principle is the usage of rotating the screw will be transported along the material to the inner wall of the shell to one end of the push for the transport work, and its head and tail support bearings in the outer shell, the bearing can be used There are dust-proof sealing device sliding bearings and sliding bearing, bearing the general use of powder metallurgy products.

Second, the performance characteristics is same. They have a large carrying capacity, safe and reliable; product adaptability, easy installation and maintenance, long life; overall small size, high-speed rotation, continuous and rapid delivery of materials; low noise, good adaptability, access to the location of the material placement is relatively flexible; sealing performance, the shell can be seamless tube production, rigid performance.

Third, the same scope of application. They can be widely used in building materials, chemical industry, electric power, metallurgy, coal and other industries, which are suitable for conveying powder, granule and small block materials, such as coal, slag, cement and grain which are less viscous and not easy to agglomerate. The series of equipment is generally used for horizontal or slightly inclined (inclination β ≤ 15 °) direction of the short-distance bulk material transport continuity, and in the process of conveying the material can be mixed, stirring, the working environment temperature is -20 ~ 50 ℃, conveying material temperature is less than 200 ℃.

The differences between the GX and LS type screw conveyors are as follows:
GX and LS-type screw conveyor is different mainly in the location of their bearing support, at both ends of the GX support bearing close to the outer shell or stuck in the outer shell, so that the adverse consequences of the installation with the change or Maintenance of the bearing is not convenient, may also be in contact with the material, the case of lax materials will enter the bearing, resulting in bearing operation is not flexible. However LS does not have this problem, both ends of its bearings are outside the shell and have the appropriate bearing to support, with easy maintenance or replacement.
In short, GX-type and LS-type screw conveyor they have more or less differences, users need based on the actual situation to decide which kind of transport equipment, we henan zhengzhou mining machinery co.ltd will be happy to serve you.
 

Message

InquiryYou can get the price list and we will contact you within one business day!

Name:*
Country:
E-mail:*
Cellphone:
Capacity:*
Raw Material:
Message:*
WhatsApp
+86 18037866379
WeChat
+86 18037866379

Contact Us